Difference between revisions of "Fitting new genoa winches to the coaming of a Fulmar"
(Created page with "First assess exactly where the new winch is to be sited, making sure the winch handle does not foul sprayhood or lifelines. Also check them in relation to where the helmsman sits...") |
(No difference)
|
Latest revision as of 21:37, 3 December 2014
First assess exactly where the new winch is to be sited, making sure the winch handle does not foul sprayhood or lifelines. Also check them in relation to where the helmsman sits.
The Treadmaster was removed (or sand off the non slip paint) and the gel coat polished. See following photos
The coaming has a plywood pad, rather than a balsa core, so through bolting does not require any additional work. Lewmar 43ST fully fitted, notice the shine on the gel coat.