Difference between revisions of "Mast and Rigging"
(Created page with "==Mast and Rigging==") |
m (→Mast and Rigging) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
==Mast and Rigging== | ==Mast and Rigging== | ||
| + | |||
| + | |||
| + | The masts and spars were made of anodised aluminium by Proctor's. | ||
| + | |||
| + | Ketch : The Mast is 34' 5" (10.5 mts) high and should be positioned in the centre hole of the cabin roof "foot" plate | ||
| + | The mizzen mast is 23'5" (7.1 mts) | ||
| + | |||
| + | Sloop : The Mast is 36' 3" (11.0 mts) and should be positioned in the 1st and 7th holes (from fwd) of the cabin roof "foot" plate | ||
| + | |||
| + | |||
| + | |||
| + | The Roller Reefing foil (Rotomarine) is 36' 3" (11.05 mts) from top of foil to the drum eye. | ||
| + | |||
| + | |||
| + | [[Renown Maintenance and Repair |^Back]] | ||
Latest revision as of 16:46, 7 December 2011
Mast and Rigging
The masts and spars were made of anodised aluminium by Proctor's.
Ketch : The Mast is 34' 5" (10.5 mts) high and should be positioned in the centre hole of the cabin roof "foot" plate The mizzen mast is 23'5" (7.1 mts)
Sloop : The Mast is 36' 3" (11.0 mts) and should be positioned in the 1st and 7th holes (from fwd) of the cabin roof "foot" plate
The Roller Reefing foil (Rotomarine) is 36' 3" (11.05 mts) from top of foil to the drum eye.
