Difference between revisions of "Steering Console"
m |
(→To Remove Steering Shaft) |
||
| Line 7: | Line 7: | ||
[[File:Top view.jpg|center|500px|Top view with chain loose]] | [[File:Top view.jpg|center|500px|Top view with chain loose]] | ||
| − | Remove circlips on inside and outside of shaft and lift out key locating chain wheel to shaft | + | Remove circlips on inside and outside of shaft and lift out shaft key (see picture below) locating chain wheel to shaft |
[[File:Shaft key.jpg|center|500px| shaft key]] | [[File:Shaft key.jpg|center|500px| shaft key]] | ||
Latest revision as of 20:35, 29 March 2018
To Remove Steering Shaft
(Before you remove the chain check for any play in the key securing the chain sprocket to the wheel shaft.)
First slacken cables at the steering Quadrant. Lift chain off sprocket wheel and secure temporarily (say by hanging on a piece of string).
Remove circlips on inside and outside of shaft and lift out shaft key (see picture below) locating chain wheel to shaft
Chain wheel can then slide off shaft inwards (forwards)
Which allows shaft to slide out aft.
If any play in steering renew key.
Reassemble by replacing shaft, sprocket, key, chain and circlips.
Grease up.
Job done
Back to Discus main page
