Difference between revisions of "Vulcan Maintenance and Repair"
Line 9: | Line 9: | ||
When I first purchased my Vulcan the helm was stiff . I had to oil all the universal joints several times and steer from end to end lots of times while tied up to free it . Picture is a rotary chain drive autohelm arrangement. On Octopus the ram did not work in heavy seas so I changed to a rotary one and that made the steering lighter ! The steering box also broke loose ( it is mounted on a wooden plate and is a Burman Landrover type box ) so I took that apart and re greased it which also helped lighten the steering . Steering now is light | When I first purchased my Vulcan the helm was stiff . I had to oil all the universal joints several times and steer from end to end lots of times while tied up to free it . Picture is a rotary chain drive autohelm arrangement. On Octopus the ram did not work in heavy seas so I changed to a rotary one and that made the steering lighter ! The steering box also broke loose ( it is mounted on a wooden plate and is a Burman Landrover type box ) so I took that apart and re greased it which also helped lighten the steering . Steering now is light | ||
− | |||
[[File:Vulcan steering.jpg|800px|center]] | [[File:Vulcan steering.jpg|800px|center]] | ||
Line 17: | Line 16: | ||
[[File:Vulcan 1078.jpg |400px|]] | [[File:Vulcan 1078.jpg |400px|]] | ||
[[File:Vulcan 1079.jpg |400px|]] | [[File:Vulcan 1079.jpg |400px|]] | ||
− | + | [[File:Vulcan 1080.jpg |400px|]] | |
+ | [[File:Vulcan 1081.jpg |400px|]] | ||
+ | [[File:Vulcan 1082.jpg |400px|]] | ||
+ | [[File:Vulcan 1083.jpg |400px|]] | ||
==Vulcan Emergency Steering Failure== | ==Vulcan Emergency Steering Failure== |
Latest revision as of 20:49, 29 January 2019
Contents
The Vulcan is great boat to own.
Some of them needed the keel floor re-enforcing.
There is the risk that osmosis may appear. If the hull is wet, over the winter open up the bilges and put a fan heater on a thermostat on plus a de-humidifier.
If just the odd blister treat it, otherwise leave well alone. The hull is so thick it won't sink!
Some purchasers asked for a double gell coat which was not as good an idea as they thought. The thick gelcoat does not flex when banged and so may cause star cracks. Good thing is with a thick gelcoat scratches can be polished out.
Vulcan Stiff Steering
When I first purchased my Vulcan the helm was stiff . I had to oil all the universal joints several times and steer from end to end lots of times while tied up to free it . Picture is a rotary chain drive autohelm arrangement. On Octopus the ram did not work in heavy seas so I changed to a rotary one and that made the steering lighter ! The steering box also broke loose ( it is mounted on a wooden plate and is a Burman Landrover type box ) so I took that apart and re greased it which also helped lighten the steering . Steering now is light
Vulcan Emergency Steering Failure
Vulcan has rod driven steering from two wheels. Couple of years ago I had cause to use the emergency steering Tee bar after the steering box came adrift, the T bar fits on the top of the fixed original extension (pic 1 and 2) I repaired the Burman box steering mounts but that is another story . Last year while trying to reverse she would only go to port because the steering had jammed and the reason it had jammed was the extension bar had fractured at its base and had fallen over leaving a sleeve (pic 3) on the rudder shaft (pic4) Why it had fractured I have no idea, the vertical split was cut by me with a multitool so I could drive a wedge in and remove it. I’d removed the cross bolt and made up a puller but that wouldn’t remove it so I resorted to the splitting it.
If you have this type of extension now is the time to give it a sideways tug!
Pic 1 Emergency Steering Extension in Place
Pic2 Emergency Steering Rudder Clamp
Pic3 Square boss at top of Rudder Stock
Pic4 Remains of Broken off Emergency Steering Extension