Difference between revisions of "DV10/20 Exhaust Elbow"
(Created page with "It's possible to make an exhaust elbow out of 1.5" pipe fittings which are readily available at the pipe centre. You will need: Blk Mall 45 deg M&F elbow-156 1 1/2 inch qty...") |
|||
| Line 4: | Line 4: | ||
Blk Mall 45 deg M&F elbow-156 1 1/2 inch qty 1 | Blk Mall 45 deg M&F elbow-156 1 1/2 inch qty 1 | ||
| + | |||
Blk H/W barrel nipple 1 1/2 inch qty 1 | Blk H/W barrel nipple 1 1/2 inch qty 1 | ||
| + | |||
Blk Mall sq tee - 161 1 1/2 x 1/2 inch qty 1 | Blk Mall sq tee - 161 1 1/2 x 1/2 inch qty 1 | ||
| + | |||
Blk Mall 45 deg M&F elbow - 156 1/2 inch qty 1 | Blk Mall 45 deg M&F elbow - 156 1/2 inch qty 1 | ||
| + | |||
1/2 inch male bspt x 1/2 inch brass hose tail qty 1 | 1/2 inch male bspt x 1/2 inch brass hose tail qty 1 | ||
Revision as of 12:57, 19 March 2018
It's possible to make an exhaust elbow out of 1.5" pipe fittings which are readily available at the pipe centre.
You will need:
Blk Mall 45 deg M&F elbow-156 1 1/2 inch qty 1
Blk H/W barrel nipple 1 1/2 inch qty 1
Blk Mall sq tee - 161 1 1/2 x 1/2 inch qty 1
Blk Mall 45 deg M&F elbow - 156 1/2 inch qty 1
1/2 inch male bspt x 1/2 inch brass hose tail qty 1
