DV10/20 Exhaust Elbow

From Westerly-Wiki
Revision as of 15:33, 17 March 2018 by Birchn (talk | contribs) (Created page with "It's possible to make an exhaust elbow out of 1.5" pipe fittings which are readily available at the pipe centre. You will need: Blk Mall 45 deg M&F elbow-156 1 1/2 inch qty...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

It's possible to make an exhaust elbow out of 1.5" pipe fittings which are readily available at the pipe centre.

You will need:

Blk Mall 45 deg M&F elbow-156 1 1/2 inch qty 1 Blk H/W barrel nipple 1 1/2 inch qty 1 Blk Mall sq tee - 161 1 1/2 x 1/2 inch qty 1 Blk Mall 45 deg M&F elbow - 156 1/2 inch qty 1 1/2 inch male bspt x 1/2 inch brass hose tail qty 1