Hatch Slides

From Westerly-Wiki
Jump to: navigation, search

How to Make Your Hatch Slide Easily without Messy Grease

This solution came up early last year on the Westerly Yahoo Discussion Group and it really works.

First buy some Teflon coated self adhesive fibre glass tape available on the web. Make the tape a little narrower than your hatch channel because you have to slide it into the channel sticky side down. On my Discus I used 1m of 12mm Teflon/ptfe tape self adhesive backed with peel off backing. This was just enough but you may be happier with a little more.


Teflon Coated self adhesive tape

Remove your hatch and clean off all the old black grease and aluminium residue both off the hatch slide and the hull mounted channel part. This can take a while and ideally requires removal of the hatch garage however with perseverance and a lot of paper tissues and solvent it is possible to clean the whole length of both slide and channel with the hatch garage in situ.


Hatch Channel


Hatch Bearer


Cut the tape to length and fix four pieces two on the hatch and two on the mating slides. The mounting screw holes need to be drilled with a through hole and slightly countersunk. Once the hatch is in place its weight and the channel end stop will hold the tape in place.

You will be amazed with the result. The hatch can be slid back with one finger making a satisfying swooshing sound like the doors on the star-ship enterprise. In fact you may want to introduce a variable friction device to make it less easy for the hatch to slide whilst sailing. Ideas for this welcomed!

This is the after picture, nice clean tape

And the big benefit is that there is no messy black grease residue to get on peoples hands or clothes.

Thanks to Ken for the pictures.

Resources

Teflon/Ptfe tape available on ebay from here [[1]]


Back to the Main Page