Difference between revisions of "Renown Maintenance and Repair"
(→Mast and Rigging) |
|||
| Line 5: | Line 5: | ||
==[[Mast and Rigging]]== | ==[[Mast and Rigging]]== | ||
| + | The masts and spars were made of anodised aluminium by Proctor's. | ||
| − | [[Renown | + | The Mast is 34' 3" (10.45 mts) high from top of foot to the mast top platform and the foot should be located:- |
| + | |||
| + | a) Ketch Rig in the centre hole of the cabin roof "foot" plate. | ||
| + | |||
| + | b) Sloop Rig in the 1st and 7th holes (from fwd) of the cabin roof "foot" plate | ||
| + | |||
| + | The Roller Reefing foil (Rotomarine) is 36' 3" (11.05 mts) from top of foil to the drum eye. | ||
| + | |||
| + | |||
| + | [[Renown Maintenance and Repair |^Back]] | ||
Revision as of 11:21, 3 December 2011
Fuel Tank
Propellor
Mast and Rigging
The masts and spars were made of anodised aluminium by Proctor's.
The Mast is 34' 3" (10.45 mts) high from top of foot to the mast top platform and the foot should be located:-
a) Ketch Rig in the centre hole of the cabin roof "foot" plate.
b) Sloop Rig in the 1st and 7th holes (from fwd) of the cabin roof "foot" plate
The Roller Reefing foil (Rotomarine) is 36' 3" (11.05 mts) from top of foil to the drum eye.
