Difference between revisions of "Steering Console"
(→To Remove Steering Shaft) |
m |
||
Line 1: | Line 1: | ||
==To Remove Steering Shaft== | ==To Remove Steering Shaft== | ||
− | First slacken cables at the steering Quadrant | + | (Before you remove the chain check for any play in the key securing the chain sprocket to the wheel shaft.) |
+ | |||
+ | First slacken cables at the steering Quadrant. Lift chain off sprocket wheel and secure temporarily (say by hanging on a piece of string). | ||
[[File:Top view.jpg|center|500px|Top view with chain loose]] | [[File:Top view.jpg|center|500px|Top view with chain loose]] | ||
− | Remove circlips on inside and outside of shaft and | + | Remove circlips on inside and outside of shaft and lift out key locating chain wheel to shaft |
[[File:Shaft key.jpg|center|500px| shaft key]] | [[File:Shaft key.jpg|center|500px| shaft key]] | ||
− | Chain wheel can then slide off shaft inwards | + | Chain wheel can then slide off shaft inwards (forwards) |
− | + | Which allows shaft to slide out aft. | |
[[File:20130403 110826.jpg|center|500px| shaft key]] | [[File:20130403 110826.jpg|center|500px| shaft key]] | ||
− | If any play in steering | + | If any play in steering renew key. |
+ | |||
+ | Reassemble by replacing shaft, sprocket, key, chain and circlips. | ||
+ | |||
+ | Grease up. | ||
Revision as of 14:19, 2 December 2014
To Remove Steering Shaft
(Before you remove the chain check for any play in the key securing the chain sprocket to the wheel shaft.)
First slacken cables at the steering Quadrant. Lift chain off sprocket wheel and secure temporarily (say by hanging on a piece of string).
Remove circlips on inside and outside of shaft and lift out key locating chain wheel to shaft
Chain wheel can then slide off shaft inwards (forwards)
Which allows shaft to slide out aft.
If any play in steering renew key.
Reassemble by replacing shaft, sprocket, key, chain and circlips.
Grease up.
Job done