Typhoon 37
Contents
Introduction
" Marry a Fulmar by all means but get a Typhoon as your mistress!" to quote The Westerly Owners Association Definitive Guides[1]
The Typhoon doesn't have the usual Westerly roominess and space you would expect from a Westerly of this size, but this is a beautiful boat to sail. Very light on the helm, wonderfully responsive and fast. More than that, it gives that magic thrill when you know you're on a special boat!
Designed to please the racing enthusiast but still accomodate the cruising family the Typhoon is considered by many to be the peak of Westerly achievement.
See also the Regatta 370 and the Ocean 37
Typhoon 37 Statistics
| Designer: | Ed Dubois | 
|
| Keel: | Fin | |
| Cockpit: | Aft | |
| LOA (feet): | 37' 4" | |
| LWL (feet): | 31' 11" | |
| Beam (feet): | 12' 4" | |
| Draft (feet): | 6' 0" | |
| Displacement (lb): | 16,470 | |
| Ballast (lb): | 6,050 | |
| Berths: | 7 | |
| Heads: | 2 | |
| Rig: | Sloop | |
| Fuel (galls (UK)): | 25 | |
| Main (sq. feet): | 361 | |
| No. 1 Genoa (sq. feet): | 500 | |
| No 1 Jib (sq. feet): | ||
| Sail ID: | TN | |
| Water (galls (UK)): | ||
| Built: | 1990 - 1993 | |
| Number Built: | 40 |
The Typhoon and Tempest Definitive Guide
Typhoon Maintenance and Repair
Replacing the Whitlock Cobra 5R Steering Pedestal Bearings
20 Years hardly rocked, the steering system of our Typhoon must have a total overhaul. One item is the steering pedestal, in particular Hull and bearings – an unpleasant grinding noise and an unbalanced feeling tells you that there is something wrong inside .Then hurry up!
Bearings First you have to remove the pedestal from the cockpit deck. Therefore undock the steering axis from the tiller lever at the underside of the pedestal after having removed the wheel. Then remove the bolt. We brought the column to a farm machinery repair, because the welded tiller lever had to be removed from the central axis of the column by a cutting disk . You cannot dismantle from the top – as you will suspect when study the original diagram . [[File:lager steuersäule alt.JPG]
]After replacing the bearings by original Lewmar parts (LE89000030) - high-end V4A quality from Germany SKF will cost you 560,- Euro each - File:Repair set steuersäule.JPG the inner parts will be put together with the 2 original bolts(Lewmar stake pin set LE89000072). Column For the paint job, File:Steuersäule neu.JPG we gave the column to a car painter with experience in working with alloy.
Dirk L., Westerly Club Nederland, TN7 s`MileStone
Typhoon Upgrades and Enhancements
TN 7 Upgrade self-tacking jib
Oh how beautiful sailing is, clipping along at 8 knots, enjoying wind and sun, and plucking the sheets from time to time-- great!. Narrow fairways, sand bars, dredgers, cargo ships and many pleasure boaters, however, make quick manoeuvering increasingly necessary on our local area, the Scheldt delta . It's not always fun. Certainly not tacking head on against a SW 5Bft on the Veersemeer (southern Netherlands), when the fairway is twice as wide as the boats length, a Dehler up front and an X in your neck, and the crew (male/female) exceeding 50 ... A self-tacking jib, is a self-tacking jib, is a jib that tack itself - without waste of power turning the winches. Sounds good. This is standard on many Scandinavian vessels and many new models are completed with it. So I go ahead with my new project- just mount it!!. But I don`t want one of these ugly constructions on stilts. No, certainly not. After some research and discussions with the local sail makers I was convinced: the new construction has to be perfect in shape and tackling work must be easy and safe with a minimum loss of power.
From a piece of our old teak garden bench I laminated a base to the construction. After that , the adjustment is made to the inclination of the mast base and the decks curve .First I thickened epoxy and placed the base to the appropriate place with an auxiliary rail. For the protection of the ship´s deck I used a sheet of plastic, so that nothing spills.
After curing, sanding down and then readjusting Now, fasten the base with the rail to the cabin deck with corresponding pins (40-80 mm). The tack angle is about 8 degrees. Look out for absolute symmetric mounting (measure from the forestay).
We opted for the rail system of Selden in 30mm. Due to the ball bearing of this system a bending of the rail is not necessary and the rail may be mounted quite flat over deck ,just between the grabrails, so that maximum Sail area is maintained and visual appearance is not affected.
.JPG)
The plain bearing sheet blocks have a breaking load of 3,000 kg, and a 10mm Dynemasheet is led through a new role in the mast upwards and then down again via deck organizers to the cockpit. In combination with a Furlex genoa-furler we now have the right sail for short weekend trips in the Delta. - We chose an Axis Laminate sail from Gaastra again, a well known and experienced Dutch sail maker.
And to compensate the additional weight of all these things, I rigged a carbon made flag pole. However not off the rack (which can be bought for 620,-Euro at every corner) but rather self-made.
Dirk L.,Westerly Club Nederland, Westerly Typhoon TN7 s´MileStone
