|
|
(4 intermediate revisions by the same user not shown) |
Line 1: |
Line 1: |
− | ==[[Upgrading to an Electric Windlass]]== | + | ==[[Upgrading to an Electric Windlass|Fitting a Quick Genius 12v windlass to a Centaur]]== |
− | | |
− | Fitting a Quick Genius 12v windlass to a Centaur | |
− | | |
− | ==[[DIY cockpit seating teak substitute]]==
| |
− | | |
− | The original teak boards were in excellent condition, but the fact is they were prone to leaks as they were bolted to the seating area. I removed these and will no doubt make some pretty drinks holders out of them in due course. I considered getting Treadmaster but I heard they were difficult to keep clean and I didn't want a rubber look.
| |
− | | |
− | When I was down at the London Boat Show at Excel I chanced upon imitation teak and found three suppliers. The one that was most helpful was Permateek so I began an exchange of correspondence when I got back home to get a good price to justify any further expenditure on my Centaur.
| |
− | | |
− | I made my mind up to get Permateek for the seating area and the tops of the coaming. Cost me over £400 but it really does look very good. I made paper templates and sent them off to Ian 'Griff' Griffiths who made up the panels for me and sent them off within a couple of weeks.
| |
− | | |
− | I followed the instructions on the Permateek website and this is the result. I used tow tubes of Sikaflex 291 white adhesive.
| |
− |
| |
− | Courtesy of Ken Hastie
| |
− | [http://www.hastie.org.uk/]
| |
− | | |
− | ==[[Centaur (and others) Headlining replacement]]==
| |
− | | |
− | An upgrade to saloon headlining: http://www.hastie.org.uk/headlining.html
| |
− | | |
− | ==[[Centaur (and others) V berth Headlining replacement]]==
| |
− | | |
− | An upgrade to the "dreaded droop" headlining problem: http://www.hastie.org.uk/vberth.html
| |
− | | |
− | ==[[Centaur (and others) Hatch replacement]]==
| |
− | | |
− | An upgrade to the opaque hatch problem. Let the light in! http://www.hastie.org.uk/hatch.html
| |
− | | |
− | ==[[Centaur Water system upgrade]]==
| |
− | | |
− | Improving the water system on a Centaur: http://www.hastie.org.uk/galleysink.html
| |
| | | |
| ==[[Centaur Sink]]== | | ==[[Centaur Sink]]== |
| Sink in Flora CR1871 | | Sink in Flora CR1871 |
− |
| |
− | ==[[Centaur Sink upgrade Method 2]]==
| |
− |
| |
− | Another upgrade of a Westerly Centaur sink: http://www.hastie.org.uk/sink.html
| |
| | | |
| ==[[Centaur Main Cabin Wall Cupboards]]== | | ==[[Centaur Main Cabin Wall Cupboards]]== |
− |
| |
− | ==[[Digital Battery Meter]]==
| |
| | | |
| ==[[Replacing a Volvo 2003 with a Beta 35]]== | | ==[[Replacing a Volvo 2003 with a Beta 35]]== |
− |
| |
− | ==[[Mainsail - Upgrading bolt rope sails to sliders]]==
| |
− |
| |
− | How to upgrade to sliders from boltrope: http://www.hastie.org.uk/mainsailsliders.html
| |
− |
| |
− | ==[[DIY solution to a clamp-on rail BBQ]]==
| |
− |
| |
− | How to make one yourself: http://www.hastie.org.uk/barbeque.html
| |